Electrolux Washer Error E20: Drain Fault
The E20 code means the Electrolux washer cannot drain the water from the drum within the expected time, usually due to a clogged filter or blocked hose.
Common symptoms:
- Cycle stops with water still in the drum
- E20 code flashes on the display
- Door remains locked
Probable causes:
Buttons, coins, or built-up lint block water flow through the bottom filter.
The rear hose is crushed against furniture, or the wall siphon has built-up grease and detergent.
The pump motor has worn out or burned out and no longer generates enough pressure.
Safe Inspection Checklist (Check off when completed):
Unplug the washer from the mains. Place towels and a shallow tray by the filter hatch, usually at the bottom front.
Open the hatch, unscrew the filter slowly counter-clockwise letting water out gradually, and remove any trapped objects or lint.
Check that the rear drain hose isn't kinked. If possible, disconnect it from the wall siphon and pour water through to confirm it flows freely.
If the filter is clean and the hose is clear but E20 persists, or the pump makes no sound at all when trying to drain, the drain pump needs professional replacement.