Electrolux Fridge Error E01-E07: Sensor Warning
This family of codes (E01, E02, E03, E06, or E07) indicates one of the Electrolux fridge's temperature sensors has stopped sending a valid reading to the control board.
Common symptoms:
- Error code visible on the panel display
- Intermittent audible alarm
- Interior temperature unstable or incorrect
Probable causes:
The connector for the relevant sensor (fridge, freezer, or evaporator) has loosened slightly, interrupting the signal intermittently.
The component has failed internally and consistently reports an out-of-range reading, requiring replacement.
The board processing all sensor signals has an internal fault and needs technical inspection.
Safe Inspection Checklist (Check off when completed):
Each number corresponds to a different sensor (fridge, freezer, evaporator, or defrost); noting it helps pinpoint which component to check.
Unplug the fridge from the mains for a few minutes. In some cases the warning clears if it was a one-off faulty reading.
Let the fridge run for several hours after the restart. If the code reappears, the corresponding sensor needs professional inspection.
These codes typically require a visit from an authorized Electrolux technician, who can measure the specific sensor's resistance and replace it if it falls outside the values expected per the service manual.