AEG Error Codes & Faults
All the error codes, diagnostics, and DIY guides we cover for AEG appliances.
7 error codes found
AEG Induction Hob: Power Level Number Flashes ("12")
When the power level flashes, typically at the number 12, on an AEG induction hob, it means the selected zone can't activate the induction coil because it doesn't detect a suitable pan.
AEG Fridge Alarm AL01/AL02: Temperature Too High
AL01 warns that the fridge zone is too warm and AL02 that the freezer temperature is rising or already too high, with an audible alarm and a flashing symbol on the display.
AEG Washer Error E10: Water Inlet Fault
Triggers when the AEG washer fails to reach the required water level within the time limit set by the control electronics.
AEG Dryer Error E61: Insufficient Heating
The E61 code indicates the AEG dryer hasn't reached the expected drying temperature within the maximum allowed time, almost always due to poor ventilation or a heating element fault.
AEG Oven Error F11: Temperature Sensor Fault
The F11 code on an AEG oven means the NTC probe measuring internal temperature is sending an out-of-range signal, so the oven cannot regulate heat accurately.
AEG Extractor Hood: Grease Filter Saturation Alert
AEG hoods include a timer that lights up an icon or warning light after accumulating a set number of operating hours, signaling that the metal filters need cleaning.
AEG Dishwasher Error i30: Overflow Protection Triggered
AEG's Aqua-Control safety system has detected water in the base tray and triggers an emergency drain to prevent flooding in the kitchen.